Skip to content
Mount-It! Under Cabinet & Ceiling TV Mount for 19" to 27" TVs | MI-4211
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 19 to 27-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 44 lb with VESA 75×75 to 100×100 mm.
Swivels 180.0° and tilts −90.0° to aim the screen at any seat and reduce glare.
Under Cabinet & Ceiling TV Mount
Features
Fits 19 to 27 inch flat screen TVs
Weight rated up to 44 lb
Swivels 90.0° left and right — aim the screen at any seat
Adjustable tilt down to −90.0° - reduce glare from above
VESA 75×75 to 100×100 mm - fits most flat panel TV brands
Supports corner wall installations
Overview
The Under Cabinet & Ceiling TV Mount is a full motion (articulating) TV wall mount compatible with 19 to 27-inch televisions and rated to hold up to 44 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 90° left or right and tilt −90° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 75×75 to 100×100 mm. Also supports corner wall installations for rooms where flat wall space is limited.
A practical choice for bedrooms, offices, or corner installs where the screen needs to follow the viewer across multiple positions.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 6.01 lb
- Wall plate dimensions: 4.13×6.5 in
Holds screens
- Screen size range: 19 to 27 in
- VESA range: 75×75 to 100×100 mm
- Weight capacity: 44 lb
Movement
- Swivel: up to 180°
- Tilt:−90°
- Corner compatible: Yes
Installation
The Under Cabinet & Ceiling TV Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 30 minutes.
Estimated install time: 30 minutes
Stud installation type: Single stud
Corner installations: Supported
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
