Skip to content
Mount-It! Full Motion Ceiling TV Mount for 32" to 77" TVs | MI-509B
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 32 to 77-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 110 lb with VESA 200×200 to 600×400 mm.
Swivels 360.0° and tilts +8.0°/−18.0° to aim the screen at any seat and reduce glare.
Full Motion Ceiling TV Mount
Features
Fits 32 to 77 inch flat screen TVs
Weight rated up to 110 lb
Swivels 180.0° left and right — aim the screen at any seat
Adjustable tilt +8.0° up / −18.0° down - reduce glare, improve your view
VESA 200×200 to 600×400 mm - fits most flat panel TV brands
Supports corner wall installations
Overview
The Full Motion Ceiling TV Mount is a full motion (articulating) TV wall mount compatible with 32 to 77-inch televisions and rated to hold up to 110 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 180° left or right and tilt +8°/−18° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 200×200 to 600×400 mm. Also supports corner wall installations for rooms where flat wall space is limited.
A practical choice for large living rooms, corner installs, or any setup where the optimal viewing position isn't directly in front of the wall.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 13.85 lb
- Wall plate dimensions: 2.25×8.0 in
Holds screens
- Screen size range: 32 to 77 in
- VESA range: 200×200 to 600×400 mm
- Weight capacity: 110 lb
Movement
- Swivel: up to 360°
- Tilt:+8°and−18°
- Corner compatible: Yes
Installation
The Full Motion Ceiling TV Mount is designed for quick and frustration free installation.
Installation is typically completed in about 45 minutes.
Estimated install time: 45 minutes
Stud installation type: Single stud
Corner installations: Supported
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
