Skip to content
Mount-It! Single Stud Tilt and Swivel TV Wall Mount for 19" to 32" TVs | MI-2829
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 19 to 32-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 44 lb with VESA 75×75 to 100×100 mm.
Swivels 60.0° and tilts −12.0° to aim the screen at any seat and reduce glare.
Single Stud Tilt and Swivel TV Wall Mount
Features
Fits 19 to 32 inch flat screen TVs
Weight rated up to 44 lb
Swivels 30.0° left and right — aim the screen at any seat
Adjustable tilt down to −12.0° - reduce glare from above
Low profile - mounts just 2.6 in from the wall
VESA 75×75 to 100×100 mm - fits most flat panel TV brands
Overview
The Single Stud Tilt and Swivel TV Wall Mount is a full motion (articulating) TV wall mount compatible with 19 to 32-inch televisions and rated to hold up to 44 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 30° left or right and tilt −12° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 75×75 to 100×100 mm.
A practical choice for bedrooms and smaller spaces where seating spans multiple directions and a fixed screen position won't cover everyone.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 2.0 lb
- Wall plate dimensions: 3.0×5.5 in
Holds screens
- Screen size range: 19 to 32 in
- VESA range: 75×75 to 100×100 mm
- Weight capacity: 44 lb
Movement
- Swivel: up to 60°
- Tilt:−12°
- Profile depth: 2.6 in
Installation
The Single Stud Tilt and Swivel TV Wall Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 15 minutes.
Estimated install time: 15 minutes
Stud installation type: Single stud
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
