Skip to content
Mount-It! Dual Front & Back TV Ceiling Mount for 32" to 86" TVs | MI-502B
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 32 to 86-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 350 lb with VESA 75×75 to 750×450 mm.
Swivels 360.0° and tilts −16.0° to aim the screen at any seat and reduce glare.
Dual Front & Back TV Ceiling Mount
Features
Fits 32 to 86 inch flat screen TVs
Weight rated up to 350 lb
Swivels 180.0° left and right — aim the screen at any seat
Adjustable tilt down to −16.0° - reduce glare from above
VESA 75×75 to 750×450 mm - fits most flat panel TV brands
Overview
The Dual Front & Back TV Ceiling Mount is a full motion (articulating) TV wall mount compatible with 32 to 86-inch televisions and rated to hold up to 350 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 180° left or right and tilt −16° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 75×75 to 750×450 mm.
A practical choice for large living rooms or any setup where the optimal viewing position isn't directly in front of the wall.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 27.02 lb
Holds screens
- Screen size range: 32 to 86 in
- VESA range: 75×75 to 750×450 mm
- Weight capacity: 350 lb
Movement
- Swivel: up to 360°
- Tilt:−16°
Installation
The Dual Front & Back TV Ceiling Mount is designed for quick and frustration free installation.
Installation is typically completed in about 60 minutes.
Estimated install time: 60 minutes
Stud installation type: Single stud
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
