Skip to content
Mount-It! Full-Motion TV Ceiling Mount for 42" to 98" TVs | MI-501L
Full Motion TV Mount
Articulating · Swivel, Tilt & Extend
An articulating full motion TV wall mount for 42 to 98-inch flat screen TVs, swivel, tilt, and extend the screen to exactly where you need it, rated up to 220 lb with VESA 200×200 to 800×450 mm.
Swivels 360.0° and tilts −24.0° to aim the screen at any seat and reduce glare.
Full-Motion TV Ceiling Mount
Features
Fits 42 to 98 inch flat screen TVs
Weight rated up to 220 lb
Swivels 180.0° left and right — aim the screen at any seat
Adjustable tilt down to −24.0° - reduce glare from above
VESA 200×200 to 800×450 mm - fits most flat panel TV brands
Supports corner wall installations
Overview
The Full-Motion TV Ceiling Mount is a full motion (articulating) TV wall mount compatible with 42 to 98-inch televisions and rated to hold up to 220 lb. Designed for rooms where seating spans multiple angles and the screen needs to track the viewer, like living rooms, open-plan spaces, and bedrooms with off-center mounting positions.
Swivel 180° left or right and tilt −24° to aim the screen at any seat and cut light reflections off the display.
Compatible with VESA mounting patterns from 200×200 to 800×450 mm. Also supports corner wall installations for rooms where flat wall space is limited.
A practical choice for large living rooms, corner installs, or any setup where the optimal viewing position isn't directly in front of the wall.
Specifications
- Product type: TV mount
- Mount type:Full motion (articulating)
- Product weight: 16.72 lb
Holds screens
- Screen size range: 42 to 98 in
- VESA range: 200×200 to 800×450 mm
- Weight capacity: 220 lb
Movement
- Swivel: up to 360°
- Tilt:−24°
- Corner compatible: Yes
Installation
The Full-Motion TV Ceiling Mount is designed for quick and frustration free installation.
Installation is typically completed in about 45 minutes.
Estimated install time: 45 minutes
Stud installation type: Single stud
Corner installations: Supported
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonary bits for concrete and brick)
- Power drill
- Stud finder
