Heavy-Duty Tilt TV Wall Mount for 37" to 80" TVs
Tilting TV Mount
Low Profile · Adjustable Viewing Angle
A low-profile tilting TV wall mount for 37 to 80-inch flat screen TVs, sits flush to the wall and lets you angle the screen, rated (up to 175 lb with VESA 100×100 to 600×400 mm).
Tilt +10.0°/−12.0° to eliminate glare and get the right viewing angle from your seat.
Heavy-Duty Tilt TV Wall Mount
Features
Fits 37 to 80 inch flat screen TVs
Weight rated up to 175 lb
Adjustable tilt +10.0° up / −12.0° down - reduce glare, improve your view
Low profile - mounts just 2.45 in from the wall
VESA 100×100 to 600×400 mm - fits most flat panel TV brands
Overview
The Heavy-Duty Tilt TV Wall Mount is a low-profile tilting TV wall mount for 37 to 80-inch televisions that sits close to the wall for a clean, minimal installation while giving you the ability to angle the screen and eliminate glare. Rated for TVs up to 175 lb.
Adjustable tilt +10°/−12° to reduce reflections and find the right viewing angle from your seat. Profile depth 2.45 in. Sits close to the wall for a neat, minimal installation.
Compatible with VESA mounting patterns from 100×100 to 600×400 mm.
A practical choice for above-eye-level installs where glare is the primary problem to solve.
Specifications
- SKU: MI-303B
- Product type: Wall TV Mount
- Mount type: Tilting
- Product weight: 7.3 lb
- Wall plate dimensions: 25.7×8.3 in
Holds screens
- Screen size range: 37 to 80 in
- VESA range: 100×100 to 600×400 mm
- Weight capacity: 175 lb
Movement
- Tilt:+10°and−12°
- Profile depth: 2.45 in
Installation
The Heavy-Duty Tilt TV Wall Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 30 minutes.
Estimated install time: 30 minutes
Stud installation type: Dual stud
Stud spacing supported: 16, 24 inch stud spacing
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonry bits for concrete and brick)
- Power drill
- Stud finder
Customer reviews
2 verified reviews from people who bought this product.
Photos from customers 1
-
MI-303B Installation
If you are looking for a wall mount with that ability to just tilt this is one you need to acquire. Taking just a few minutes to organize the parts in the shipping container I was able to follow the installation instructions without a problem. Having a wall stud finding is a MUST. Once I was able to locate two studs the rest just fell into place. I took a few extra steps to double check the placement of the mount with respect to the size of the monitor. It's worth the time. Having the built-in level is a dream - makes final placement a breeze. Installation time was less than an hour remembering I took a few extra steps to ensure placement of the monitor. They give you all of the mounting hardware you will need can't get any better than that.
-
Good but complicated
There are trade offs in items. To be able to use from 100 to 400 need lots of variability and screws to match with all the types of TVs. Used this on small by today’s standards tv with 100. Used in combo with tempered glass shelf to mount audio equipment below tv. Worked together for completely mounted effect.
-
No reviews match that filter.
Bought this product?
Tell other customers how it worked out — it takes a minute.
