Tilting TV Wall Mount for 19" to 32" TVs
Tilting TV Mount
Low Profile · Adjustable Viewing Angle
A low-profile tilting TV wall mount for 19 to 32-inch flat screen TVs, sits flush to the wall and lets you angle the screen, rated (up to 44 lb with VESA 75×75 to 100×100 mm).
Tilt +10.0°/−15.0° to eliminate glare and get the right viewing angle from your seat.
Tilting TV Wall Mount
Features
Fits 19 to 32 inch flat screen TVs
Weight rated up to 44 lb
Adjustable tilt +10.0° up / −15.0° down - reduce glare, improve your view
Low profile - mounts just 1.4 in from the wall
VESA 75×75 to 100×100 mm - fits most flat panel TV brands
Overview
The Tilting TV Wall Mount is a low-profile tilting TV wall mount for 19 to 32-inch televisions that sits close to the wall for a clean, minimal installation while giving you the ability to angle the screen and eliminate glare. Rated for TVs up to 44 lb.
Adjustable tilt +10°/−15° to reduce reflections and find the right viewing angle from your seat. Profile depth 1.4 in. Sits close to the wall for a neat, minimal installation.
Compatible with VESA mounting patterns from 75×75 to 100×100 mm.
A practical choice for above-eye-level installs where glare is the primary problem to solve.
Specifications
- SKU: MI-203T
- Product type: Wall TV Mount
- Mount type: Tilting
- Product weight: 2.0 lb
- Wall plate dimensions: 2.0×4.125 in
Holds screens
- Screen size range: 19 to 32 in
- VESA range: 75×75 to 100×100 mm
- Weight capacity: 44 lb
Movement
- Tilt:+10°and−15°
- Profile depth: 1.4 in
Installation
The Tilting TV Wall Mount is designed for quick and frustration free installation.
Easy installation is typically done in about 15 minutes.
Estimated install time: 15 minutes
Stud installation type: Single stud
Safely install on these types of surfaces:
- Tile over studs (tile on backer board over studs)
- Tile over masonry (tile on concrete or block)
- Plywood backing wall
- Solid wood wall (planks, beams, timber)
- Brick veneer
- Brick (solid brick)
- Concrete block (CMU/cinder block)
- Concrete (poured concrete)
- Metal studs (drywall over metal studs)
- Wood studs (drywall over studs)
Tools you'll typically need:
- Screwdrivers or socket wrench
- Measuring tape
- Level
- Drill bits (wood bits for studs or masonry bits for concrete and brick)
- Power drill
- Stud finder
Customer reviews
14 verified reviews from people who bought this product.
-
When you need an easy to install no frills and gets the job done TV/Monitor mount.
I would much rather have my TV mounted on the wall. It takes up so much less space. When we got our new(ish) TV for our bedroom I decided to switch out the old mount as well. Unlike the old mount we decided we didn't need any frills no tilts or swivels etc.The Mount-It! Fixed TV Wall Mount was a perfect choice. Installing the mount is a breeze even if you're not that handy. The mount comes apart into two pieces once you remove the two screws on the top that connect them together. Once apart attach the TV plate to your TV with the included screws. There are two sets of screw holes so it should be fairly universal. If I were to have any complaints it would have been nice to include a space set that distances the plate from sitting directly on the TV. I would recommend cables with a 90 degree angle on the plug to minimize space needed between the wall and TV. I ended up picking up longer screws and some plastic spacers at the hardware store to move to the TV out about 1 1/2 to accommodate my HDMI streaming stick. Even using a 90 degree adapter it was a little tight.Mount-It! already has attached a small bubble level on the back plate so once you get it at the height you want you'll know it's level and you don't need any extra tools. If you already do a bunch of random fix-its around the house install should be fairly self explanatory. I don't normally have a second set of hands around. I found easiest to set the top hole tighten the screw so the plate is snug but moves. It's easy to adjust until level and mark the second hole. Always remember to use wall anchors (two are included) so that you have a good hold. No one wants there expensive TV falling off the wall.If you remember when you took them apart the two plates connect via a slide channel. Just line up the TV with this channel and slide it together. Replace the two lock screws that hold the plates together and you're done! Minus the experimenting with spacer size install took me about 10 minutes of putzing about. Please note I was lucky enough to receive this product at discount in exchange for my honest and unbiased review.
-
Easy peasy.
I was needing to move my tv up off the stand because my daughter likes to stand right in front of the tv. So I purchased this tv wall mount and it was extremely easy to install and mount. I did it in under 30 minutes having never done it before. So I would say it was a success! Easy to figure out and easy to accomplish! I would recommend this for smaller tv's but only if you need it for a stationary spot as you can't move or turn this wall mount.I received this product at a discount in exchange for my honest and unbiased opinion whether it is negative or positive.
-
Five Stars
This was ordered to replace half of a previously used bracket. Everything lined up perfectly as a standard measurement.
-
Five Stars
works
-
Nice simple wall mount.
Nice simple wall mount. Easy to install and does the job.
-
Five Stars
Love it. I use it my travel trailer it's been up for 2 months and it perfect.
-
It works great in my RV and it sit on a post ...
It works great in my RV and it sit on a post and not on the wall in the bed room.
-
easy to get to
This was used for a couple of 17 monitors. Up quickly easy to get to did the job well just as advertised.
-
Five Stars
good product
-
... this in the bow of my boat and it's super sturdy. Awesome low profile design too
I actually mounted this in the bow of my boat and it's super sturdy. Awesome low profile design too!
-
Sturdy tv mount
This works well in our 5th wheel trailer. We bought it so we could leave our 26 inch flat tv in place while we travel. I can't say it is perfect because our tv is slightly rounded on the back which creates a jiggle of the tv when our trailer is in motion. We fixed that by velcro blocks on the bottom of the tv where it meets the wall thus a firm setting. As others have noted be sure to plug in any cords to DVDs etc. before you hang the tv. There is no room for any cord to stick out from the back of the tv; only from the sides of the tv. It is close to impossible to see where the wall bracket is so one can slide the included tv bracket in place. I don't want to take the tv down very often. Also there is no way to pull the tv away from the wall to angle it if needed. Last year we had installed a different mounting bracket that swung out from the wall. That did not work for us because of all the movement while we were on the road. In this way this stationary mount works very well.
-
Four Stars
as advertized
-
Nor for small screens
This item would be a lot more useful if it included the 50 mm x 50 mm pattern.
-
Three Stars
It stated 15 degrees of tilt did not find that feature!
No reviews match that filter.
Bought this product?
Tell other customers how it worked out — it takes a minute.
